Phantom v2512 25,000 FPS Slow-Motion Camera

• 28 micron pixel size
• 12-bit depth
• Connections include:
  • Time code
  • FSYNC
  • GPS
  • Range data
  • Trigger
• 63 partition memory
• Continuous recording

What’s in the box?

• Power supply with XLR extender
• Ethernet Cable
• Capture cable
• Printed manual
• Phantom PCC software
• Sturdy Pelican case

Short Description

• The fastest one megapixel digital high-speed camera on the market, the v2512 is capable of taking over 25,000 frames-per-second (fps) at full 1280 x 800 resolution. And, with the FAST option, up to 1,000,000 fps at reduced resolution.

Throughput/Speed

• 25 Gpx/s
• Max speed at full resolution of 1280 x 800 is greater than 25,000 fps
• Max speed at reduced resolution of 256 x 32 is 1,000,000 fps (requires export controlled FAST option), 663,250 fps without the FAST option
• Record direct to CineMag at up to 1Gpx/second
• Minimum frame rate of 100 fps

Sensor Specifications

• CMOS sensor
• 1280 x 800 pixels
• 28 µm pixel size
• 35.8 mm x 22.4 mm
• 12-bit depth
• TE and heat pipe cooled
• CAR in 128 x 16 increments
• ISO Monochrome 32,000D; 100,000T
• ISO Color 6,400D; 10,000T
• E.I. range 32,000-160,000D (mono);6,400-32,000D (Color)

Exposure

• 1 µs minimum exposure standard, 265 ns minimum exposure with FAST option (export controlled)
• Global electronic shutter
• Extreme Dynamic Range (EDR)
• Auto Exposure
• Shutter Off mode for PIV

Memory

• 72 GB, 144 GB, 288 GB high-speed internal RAM
• CineMag IV for non-volatile storage (1 TB, 2 TB)

Record Times

• 7.6 seconds at maximum frame rate, 12 bits, 1280×800 resolution and into maximum internal memory
• Longer record times are available when recording directly to a CineMag at lower frame rates

Special Features

• Segment memory for up to 63 cines in multi-cine mode
• Continuous recording
• Memory gate
• Event marking
• Frame timestamp
• IRIG In (modulated and unmodulated)
• IRIG Out (unmodulated)
• Sync-to-Trigger
• GPS input for GPS timing, latitude & longitude
• Shutter off mode for PIV exposure
• 375 ns straddle time
• Burst mode
• Internal mechanical shutter for automatic/remote Current Session Reference (CSR)
• Secondary IP address
• Field-based firmware upgrade capable

Triggering

• Programmable trigger location (pre/post trigger recording)
• Image-Based Auto-Trigger standard
• Trigger from software
• Hardware trigger BNC

Timing and Synchronization

• 15ns timing accuracy
• Frame synchronization to internal or external clock (FSYNC)
• IRIG in/out
• Ready output (high when camera is armed and ready to record)
• Strobe output (low during frame exposure time)

Signaling

• Programmable I/O ports includes adjustable (assign and define) signals including F-sync, strobe, event, trigger output, ready and more
• FSYNC, Trigger, Timecode In, Timecode Out, and Strobe BNCs on camera body
• Range Data input on camera body
• Remote port
• GPS input for GPS timing, longitude & latitude
• Capture connector  (Available signals: Event, Trigger, Strobe, Ready, IRIG In, IRIG Out, Video Out, Serial Port, Power Out, A-Sync (IBAT Trigger), Pretrigger/Memgate)
• Break-out-Box compatible (IRIG-in, IRIG-out, NTSC/PAL Video, Trigger, Event, Strobe, A-Sync, Pre-Trigger/Memgate, Ready) Note: cannot power the camera from the BoB

Connectivity

• Gb Ethernet for both control and data
• 10 Gb Ethernet

Camera Control

• Phantom Camera Control software (PCC)
• On-Camera Controls standard
• Remote Control Unit (RCU)
• SDK available

Video Out

• Analog video (NTSC or PAL) available on Break-out-Box
• Two HD-SDI ports on camera
• Component viewfinder port

Lensing

• Nikon F-mount standard, supports F & G style lenses
• Canon EOS mount optional
• C-mount optional
• (lens not included)

Video Processing

• Brightness
• Gain
• Gamma
• Saturation
• Hue
• White Balance
• Color interpolation algorithm
• Flare
• Pedestal
• Tone curve
• Filters
• Color matrix
• Image flip and rotate
• Crop
• Scale

Data Acquisition

• National Instruments M- and X-Series DAQ modules with integrated support in PCC

Motion Analysis

• Basic measurements via Phantom Application:
• Distance
• Speed
• Acceleration
• Angles and Angular Speed
• Manual and Automatic point collection for target tracking
• Compatible with 3rd party solutions

Supported File Formats

• Cine, Cine Compressed, Cine RAW, AVI, h.264 mp4, Apple ProRes .mov, Multipage TIFF, MXF PAL, MXF NTSC, Uncompressed QuickTime, Windows BMP, OS/2 BMP, PCX, TGA, TIFF, LEAD, JPEG, JTIF, RAW, DNG, DPX

Power

• 100 – 240 VAC, 280 Watt power supply included
• 20 – 28 VDC backup battery input on camera back panel

Mechanical Specifications

• 11 x 7.5 x 7.43 inches, 28 x 19 x 18.88 cm (L, W, H) without handle or lens. Handle adds 2.24″(5.7 cm) to height.
• Weight: 17 lbs, 8 oz, 8.1 kg

Environmental Specifications

• Operating Temperature: -10 to +50 C
• 10G Operating Temp: +5 – +50 C
• Storage Temperature: -20 to + 70 C
• Humidity: 95% non-condensing
• Altitude:
• Operational: 0 to 10 k feet above sea level
• Non-Operational: -500 to 50 k feet above sea level
• Regulatory(EMI/EMC/ESD):
• Emissions: EN 61326-1, FCC part 15
• Immunity: EN 61326-1
• Random Vibration:
• Operational:7.5 Grms, 3axes, IAW MIL-STD-202G.
• Shock:
• Operational: 5.5G, 11mSec sawtooth, 3 axes,60 pulses total.
• Non-Operational: 30G, 11mSec sawtooth, 3 axes,60 pulses total.
• Safety: IEC 60950

APIs

• Phantom SDK
• LabView
• MatLab

Ships Standard With

• Power supply
• Ethernet cable
• Capture cable
• Phantom PCC software
• Getting Started Guide

Options

• FAST Option
• Canon EOS lens mount
• PL-mount

Popular Accessories

• CineMag IV
• CineStation for CineMag IV
• Video monitor for use with on-camera controls